127cm T-Track bar.
Aluminium Finish.
Aerodynamic Profile

Aluminium Finish.
Aerodynamic Profile

108cm. This Thule aerobar comes in a lightweight aluminium design featuring T track for accessory applicatio

135cm Rapid Load Bar

120cm Rapid Load Bar

108cm Rapid Load Bar

127cm Rapid Load Bar

Thule Locking Knobs Kit 527, security replacement for various types of Thule load and bike carriers. 4 lockable knobs with female threaded nut fastenings.

The Thule 562 is a simple, non-locking, easily mounted ski carrier that transports two pairs of skis. The Thule 562 ski carrier fits traditional square roof bars only.

2 x 275cm Straps

This clamp kit is suitable for the traditional Thule load bar range. You will also need bars & a foot pack.

Thule Rapid System Fitting Kit is required to complete roof bar application with Thule 750 foot pack & Thule roof bars. A fitting kit comprises of coated clamps and rubber base pads, which are shaped to fit the contours of your vehicle perfectly. In many cases when moving between gutterless vehicles, the fitting kit is the only part of the roof rack system you require to change.

Rapid Fitting Kit.

Rapid Fitting Kit.

This Fitting Kit combines with a Foot Pack & bars for a perfect fit to the fully integrated roof railing. Fulfils the proposed City Crash norm

Safe and easy to use.

The Thule 878XT Set-to-Go Saddle kayak racks are the most adaptable kayak saddles available. Provides the perfect combination of boat hull conformance and lateral stability. Sold as a pair allowing for set-up options: OPTION 1) Order two pairs to make a complete set, one pair each attaches to Thule base rack front and rear load bars creating an excellent sturdy and stable kayak rack solution. OPTION 2) Or mix and match by using one pair of 878XT saddles on the front Thule load bar with either the 877XT Rollercoaster (not included) or the 875XT Hydro Glide Saddle (not included) on the rear Thule load bar for even easier kayak loading options.

For cars with normal roofs this is a secure and stable load carrier foot, with stylish design that makes it look great on your car. The complete load carrier consists of three separately sold components: footpack, load bars and a fitting kit that is uniquely designed for perfect fit to your particular model of car. This is the foot pack; you will also need bars & a fitting kit. When you change your car it is very likely you only need to replace the fitting kit - a smart choice in the long run! Simply slide the foot onto the load bar. Adjust according to the graded scale on the bar and secure into place.

The Thule 579 Canoe Rack comes with padded cradles offering maximum stability and a soft, comfortable resting place for your canoe. Canoe rack comes complete with two heavy duty straps. Includes four rubber padded cradles for attaching to Thule front and rear load bars. Attaches to Thule square load bars only.

Fully lockable multipurpose holder for carrying paddles, masts, oars, and other similar-sized items. Fits Thule standard and Xsporter load bars, Yakima®, and most factory-installed racks. Fits items up to 4 inches in diameter. Capacity to transport and lock multiple paddles. Neat and easy cable management with built-in clip to secure extra cable length.

The Thule 873 Hydroglide Carrier allows you to slide your boat, kayak or surfboard easily into place on your vehicles roof. The soft pads adjust to suit the contours of the craft and 2 x 4m webbing straps are supplied to hold it firmly in place. The 873 Hydroglide Carrier consists of 1 x pair of soft felt lined pads (shown below) and 1 x pair of soft rubber supports as used on the 874 carrier. The 873 Hydroglide Carrier fits all Thule roof bar types.

A basic load carrier for cars with rain gutters. This type of product has been produced and continuously improved by Thule for the last 30 years. The result is a load carrier that is very easy to mount, without using any tools. For cars with raised roofs we sell Thule 952 and 953.

This is a pack of 4 feet from the Thule traditional load carrier range for cars & vans with rain gutters. You will also need bars. Easy mounting as the feet and bars attach simultaneously to the roof when the thumb wheel is turned. All parts coming into contact with the car are coated with protective, soft plastic.

For space-saving kayak transport. A carrier designed to simplify the loading process. The kayak is transported protected, on an angle, creating extra space for other gear to be loaded onto the car roof. New, improved pads and metal brackets make the product more stable.

Indestructible composite shaft. MINN KOTA 30-pound thrust trolling motor has 8 speeds: 5 forward speeds and 3 reverse speeds. Handle controls on/off, speed, forward/reverse direction. Adjustable depth collar. Telescoping handle. Quick release tilt lever. Multi-position mounting bracket. Easy grip clamp screws. Weedless propeller.

$320.00

MINN KOTA Endura 40 Freshwater Transom Motor
Telescoping Handle. Lever Lock Bracket. Indestructible Composite Shaft. Weedless Wedge.

$520.00

36 Lbs thrust, 36" shaft, 12 Volts. 42 Amp Max Draw. Speeds: 5 forward / 3 reverse.
Weedless Wedge 2 prop. 6-in telescoping handle. Twist Tiller control. Maximum Boat Length: 5791mm.

$599.00

Stainless steel hardware. Urethane encapsulated electronics. Sacrificial anode. Maximizer.

$760.00

Stainless steel hardware. Urethane encapsulated electronics. Sacrificial anode. Maximizer.

$1359.95

Designed with holding bracket. Suitable for all Sevylor boats from the XR56 and above